5 Min Easy Icom 7300 Firmware Update Procedure

After a lot of practice, this is how I update my firmware in the Icom IC-7300. It’s a simple 5 minute procedure.

I have a longer video out on how to update the firmware and you can see it here: https://youtu.be/s8rboJ1p2Bc

1. Format SD card if necessary. I do a format anyway just to be safe.
2. Save your settings to the SD card.
3. Copy the new firmware from your PC or Mac to the SD card IC-7300 folder!
4. Update firmware.
5. Reload your settings.

See sections 8 and 15 in the Icom 7300 full manual.

I’m an Amateur Radio enthusiast. I love the hobby and experimenting with radios, antennas and software. I have a lot of fun. On my YouTube channel I upload videos mostly on the Icom 7300 and Icom 7610 as well as Ham Radio software programs. I hope to inspire people to get involved in Amateur Radio.

○○○ LINKS ○○○

For parts and equipment I use, please visit my website ► http://www.K0PIR.us

My Instagram feed ► https://www.instagram.com/k0pir.us/

My Twitter feed ► https://twitter.com/K0PIR

Facebook page ► https://www.facebook.com/HamRadioK0PIR

Visit my QRZ page ► https://www.qrz.com/db/K0PIR

Thanks for watching! Please like, subscribe and share!

Best 73 – Rich, K0PIR

DISCLAIMER: This description may contain affiliate links, which means that if you click on one of the product links, I may receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!

Leave a Reply

Your email address will not be published. Required fields are marked *

Available for Amazon Prime