Icom 7610 Virtual Serial (COM) Ports Explained

This is a clip on how the virtual serial (COM) ports get configured in the Icom 7610. How to tell which COM port on your computer is port A and B.

Visit my website for an article on HRD and WSJT-X for the Icom 7610: http://www.k0pir.us/the-icom-7610-ham-radio-deluxe-setup/

Page 80 in the IC-7610 Advanced Manual.
○○○ Thanks to Chen, W7AY on the Yahoo groups for the tidbit on finding port A & B and SN in Device Manager, COM properties.○○○

At the end an example of N1MM Logger+ using one cable. You can have the spectrum display and still do RTTY (FSK) keying or CW if you like. No need for additional software to create virtual serial ports. It’s all here in the radio and driver.

I’m an Amateur Radio enthusiast. I love the hobby and experimenting with radios, antennas and software. I have a lot of fun. On my YouTube channel I upload videos mostly on the Icom 7300 and Icom 7610 as well as Ham Radio software programs. I hope to inspire people to get involved in Amateur Radio.

○○○ LINKS ○○○

For parts and equipment I use, please visit my website ► http://www.K0PIR.us

My Instagram feed ► https://www.instagram.com/k0pir.us/

My Twitter feed ► https://twitter.com/K0PIR

Facebook page ► https://www.facebook.com/HamRadioK0PIR

Visit my QRZ page ► https://www.qrz.com/db/K0PIR

Thanks for watching! Please like, subscribe and share!

Best 73 – Rich, K0PIR

DISCLAIMER: This description may contain affiliate links, which means that if you click on one of the product links, I may receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!

Leave a Reply

Your email address will not be published. Required fields are marked *

Available for Amazon Prime