This is an extension off the ham stick commander idea! Why settle for ham sticks when you can do a full 1/4 wave 4 band antenna, similar to the DX Commander, but with no mast!?!
This is a demonstration and quick overview. In the future: We will do a full build and demonstration, check SWR, impedance, etc. Stay tuned! By the way, if you have any questions, now would be the time to ask them in the comments, so I may answer them in the next video(s).
full respect to my Good friend, Callum. he makes imagination a fun thing. @m0mcx
90 Degree Elbow Connector from W5SWL.COM (Great connectors, no affiliation).
www.shophamradiodude.com – Place for 3d Printed or aluminum plate.
Trucker mount – https://amzn.to/3V8aCgO Can be found for only 10 bucks at the fests. Look for them there or check out tower electronics. I do NOT recommend connectors from tower. (This was an affiliate link, but I encourage you to find cheaper)
I used DX Engineering antenna wire, but you can use bntechgo, if you want – https://www.dxengineering.com/parts/dxe-antw-500?seid=dxese1&gclid=CjwKCAiAyfybBhBKEiwAgtB7fjJgPazP7sloo3w0yRxkUN9mUN4z_2c0Ep3-5mlpwy5Cgi4i5qFDeBoCsIEQAvD_BwE
/>
That’s not all the parts, but the main ones. More to follow!
#hamradio #antenna #dxcommander